Quick answer: How you care for your wallet depends on which variant you have. Carbon fiber variants need no special care: use them as normal. Leather variants should stay away from water, and if one gets wet by accident, wipe it with a dry cloth. For both, keep the wallet away from keys and abrasive surfaces, and check the card mechanism for dust or grit now and then.
In this guide:
Care by Variant
- Carbon fiber variants. No special care needed. Use the wallet normally, and wipe it clean with a soft cloth whenever it gets dirty.
- Leather variants. Avoid water. If the wallet gets wet by accident, wipe it with a dry cloth right away.
Before cleaning either type, take out your cards and cash, and shake out any lint or crumbs from the card area.
How to Protect the Finish
- Keep the wallet out of the same pocket as keys and coins, which cause most surface scratches.
- Don't use abrasive pads, scouring powder or strong solvents.
- Avoid leaving it in extreme heat, such as on a dashboard in summer.
- Small marks are normal on any item that gets daily use.
Keeping the Mechanism Smooth
A pop-up wallet has moving parts, so grit can slow it down. If the cards stop lifting smoothly, take the cards out and check the card area for debris. Wipe it out with a dry cloth, and don't force anything. If it's still stiff, contact the maker's support instead of taking it apart.
Aristo Vault wallets come in leather and carbon fiber variants, with an aluminum body and a pop-up card system. A quick wipe and a monthly check of the card area is usually all they need.
FAQ
Can I get my wallet wet?
Carbon fiber variants are fine to use normally. Leather variants should avoid water, and if one gets wet by accident, wipe it with a dry cloth.
What should I do if my leather wallet gets wet?
Take out your cards and cash, then wipe the wallet with a dry cloth as soon as you can.
How do I remove scratches?
Light marks are normal. Avoid polishing compounds and abrasives unless the maker recommends them for your finish.
Does cleaning affect RFID protection?
Normal wiping shouldn't. If the blocking is built into the structure, it doesn't wash off.